BSQWW - K-PRENE ADHESIVE PART A, KPA-202

  • MSDS: BSQWW
  • Manufacturer: ACROTECH
  • Product Name: K-PRENE ADHESIVE PART A, KPA-202
  • National Stock Number: 8040-00N041671
Product Identification

Product ID:K-PRENE ADHESIVE PART A, KPA-202
MSDS Date:01/01/1986
FSC:8040
NIIN:00N041671
Kit Part:Y
MSDS Number: BSQWW

Responsible Party
ACROTECH
INDUSTRIAL COURT NORTH
LAKE CITY, MN 55041
US

Emergency Phone: 612-345-2598

Info Phone: 612-345-2598

Cage: 4Z205

Contractor
ACROTECH
LAKE CITY, MN 55041 US

Telephone: 612-345-2598

Cage: 4Z205

Ingredients

EPON 820; (EPOXY RESIN)

CAS: 25068-38-6

RTECS: KC2100000


PROPANE, 1-BUTOXY-2, 3-EPOXY-; (BUTYL GLYCIDYL ETHER)

CAS: 2426-08-6

RTECS: TX4200000

Fraction By Weight: 7%

OSHA PEL 25 PPM

ACGIH TLV: 25 PPM

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATING TO SKIN & EYES. POTENTIAL
DERMAL SENSITIZER. OVEREXPOSURE TO VAPOR MAY RESULT IN IRRITATION
TO RESPIRATORY TRACT. ING 1:MILDLY IRRITATING TO SKIN. ING 2:STRONG
SKIN SENSITIZER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST:CALL MD IMMEDIATELY . EYES:FLUSH LIBERALLY W/WATER FOR
AT LEAST 15 MINUTES. CONSULT MD. SKIN:WASH W/MILD SOAP & WATER.
REMOVE & LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. INHAL:REMOVE
TO FRESH AIR.

Fire Fighting

Flash Point Method:SCC
Flash Point:>100F,>38C
Extinguishing Media:CARBON MONOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN

Accidental Release

Spill Release Procedures:WEAR RUBBER GLOVES & WIPE UP W/ABSORBENT
MATERIAL. RESIDUE MAY BE REMOVED W/NON-FLAMMABLE SOLVENT LIKE
METHYLENE CHLORIDE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT W/SKIN & EYES. CLOSE
CONTAINER AFTER EACH USE & STORE IN COOL, DRY PLACE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NORMALLY NOT REQUIRED.
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APRV CHEMICAL WORKERS GOGGLES (FP N
Other Protective Equipment:EYE WASH, SAFETY SHOWER. NORMAL INDUSTRIAL
WORK CLOTHES.
Work Hygienic Practices:PRACTICE GOOD PERSONAL HYGIENE.
Supplemental Safety and Health
% VOLAT:0.5 MAX (WT).

Chemical Properties

Vapor Pres:SEE ING 2
Spec Gravity:1.13
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:EXCESS PART "B".
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
CARBON MONOXIDE & VARIOUS HYDROCARBONS.

Disposal

Waste Disposal Methods:INCINERATE OR LANDFILL ACCORDING TO LOCAL, STATE
& FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.